GRIPEDIA TOPIC PORTAL β’ 05
Electric, Distro & Virtual Prod
Cam-Lok 3-Phase Distro, Wire Gauge Voltage Drop, DMX/CRMX Control & LED Volumes.
Equipment Category Wikis
Norms Equipment for Electric & ICVFX
Glossary Entries in This Domain (54)
Aiming
Directing the optical center beam of a lighting fixture or reflector toward a designated target area....
Auto-Pole (Varipole)
A telescoping pneumatic or lever-locking pole clamped between ceiling and floor without fasteners....
Baby
A term for 750-watt or 1000-watt lighting fixtures, typically equipped with a 5/8" female receiver in the yoke...
Bale
Also called a Yoke, this "U"-shaped bracket on lighting fixtures allows for tilting and pivoting....
Beard
Black foil used to block light leakage from the bottom of a fixture....
Becky
An adjustable hanger, similar to a Baby Trombone, used to mount lights on set walls. It features two 5/8" baby...
Best Boy Electric (BBE)
The 1st assistant to the Gaffer; manages electrical logistics, crew scheduling, and rental orders....
BFG
Stands for "Big Freakin' Light."...
Big Eye
A Mole Richardson 10K light fixture with a 29" Fresnel lens....
Black Wrap (Cinefoil)
Heavy matte-black coated aluminum foil molded onto barn doors to eliminate optical light leaks....
Brute
A carbon arc lighting fixture, one of the heaviest in the industry....
Bumble Bee
Cable crossovers or ramps, also called Yellow Jackets....
Candle Stick
A pipe with a 1-1/8" Junior receiver, designed for mounting large lighting units in lifts....
Chain Vise Grip
Heavy locking vise-grip pliers fitted with an adjustable steel link chain and welded 5/8" Baby Pins to wrap an...
Cinevator
A motorized heavy-duty light stand with a 300-pound load capacity. Operates on 110V or 220V, designed to raise...
Clipboard
A flat piece of metal or wood in various sizes (e.g., 3"x6", 8"x14") with an attached clip, used as an extende...
Condor
A self-propelled boom lift / cherry picker used to suspend high-output HMIs or overhead lighting rigs at heigh...
Crank-o-vator
A double riser crank-up stand that lifts lighting fixtures weighing up to 150 lbs. A Low Boy version is also a...
Cut-Down Stand
A custom-shortened rolling light stand modified to navigate under low ceiling soffits....
Donut
A square plywood piece with a center hole, used to stabilize rolling stands without wheel locks. Often nailed ...
Dressing Cables
Neatly coiling, taping, and routing electrical distribution feeders along walls and under carpets....
Edison Plug
Standard North American 3-prong NEMA 5-15 120V household AC electrical connector....
Electrical box tie-in
A clamp-style cable end for connecting to a 3-phase electrical box. Features a threaded twist-lock mechanism a...
Electrician (Juicer / Spark)
A certified set lighting technician responsible for electrical distribution and fixture rigging....
Fall-Off
The progressive reduction in light intensity as distance increases, governed by the inverse-square law....
Feeder Cable (Cam-Lok)
Heavy-duty single-conductor electrical cable (2/0 or 4/0 AWG) carrying 400A three-phase power....
Gaffer
The Chief Lighting Technician (CLT) who heads the lighting department and executes the Director of Photography...
Gator Grip
Also called a Gaffer Grip, a clamp with adjustable jaws and 12 rubber pads for surface protection and secure c...
Genny (Generator)
Mobile diesel-powered electrical generator providing portable power for cinema lighting....
Globe
A general term for a light bulb used in film and stage lighting....
Hard Light
Light emitted from a small, distant, or collimated source producing crisp, sharp-edged shadow penumbras....
Hollywood Riser
Also called a Junior Riser or 2K Riser, used for extending the height of Junior stands....
Inky
A 300-watt Mole light fixture....
Juice / Spark
Film set slang: 'Juice' refers to electrical power supplied to set fixtures via generators, tie-ins, or distri...
Juicer
Traditional film slang for a set lighting technician or electrician....
Key Light
The primary light source in a lighting setup, forming the foundation of the lighting design....
Kicker
A backlight or rim light positioned behind and to the side of an actor to separate them from the background....
LamΓ - or, Lame with E accent acute
Silver or gold laminated onto a tricot fabric, used to reflect light. Available in sizes up to 20'x20'....
Low Boy
A compact, wide-footprint low-profile steel stand engineered for low-angle heavy fixture mounting or under-win...
N.D.
Gels used to reduce light intensity without altering its color. Applicable for lights or windows....
Open-Ended
Scrims or flags with a wire frame on one side to eliminate frame shadows....
Pig Tail
A short electrical cable with connectors at both ends....
Poultry Bracket
Converts objects like poles, trees, or lamp posts into light stands, with a 1-1/8" Junior receiver and a 5/8" ...
Pup
A 1000-watt (1k) light fixture....
Quick Stand
A lightweight stand with quick setup and extra height capabilities....
Riser
A telescoping vertical steel tube section within a light stand column....
Sparky
Slang for an Electrician on set....
Stair Block
Wooden blocks stacked like stairs, used to elevate furniture on set. Also called Step Blocks....
Stinger
An on-set heavy-duty single-circuit 12/3 AWG AC extension cord (25 ft or 50 ft)....
Stirrup
A mounting device for attaching fixtures to Telescoping Hangers with pipe clamps....
Trick Line (#4 Sash Cord / Spot Cord)
Black braided unspotted cotton cord used for tying off rags and securing cables....
Trombone
Telescoping arms for hanging lights on set walls, available in Baby or Junior versions....
Turtle Stand
A C-Stand with a removable base, also called a C+Stand....
Wall Sled
Rigging equipment for mounting lights or flags on set walls....