GRIPEDIA FIELD GUIDE โข Dollies, Track & Rolling โข HOLLYWOOD, CALIFORNIA, USA
Apple Boxes, Wedges & Dolly Track Cribbing Mechanics
True 9-ply 1/2 inch Baltic Birch structural specs (8,850 psi compression), standard Imperial Apple Box nested heights, and opposed-wedge track leveling.
Direct Field Answer: Standard Hollywood wooden leveling gear turns simple 20" ร 12" Baltic Birch modules (Full 8", Half 4", Quarter 2", Pancake 1") and opposed hardwood wedges into structural shoring rated above 500+ lb point loadsโleveling uneven location floors beneath heavy 1,200 lb hydraulic camera dollies.
1. Standard Apple Box Dimensional Matrix (KPW-AB000-FAM)
| Nomenclature | Exterior Footprint | Height | Orientations (Stand Up / Side / Flat) | Primary On-Set Function |
|---|---|---|---|---|
| Full Apple Box | 20" ร 12" | 8" | 20" Tall / 12" Tall / 8" Tall | Seating, camera riser, heavy tripod/dolly blocking |
| Half Apple Box | 20" ร 12" | 4" | 20" / 12" / 4" | Modular mid-step elevation, C-Stand leg bridging |
| Quarter Apple Box | 20" ร 12" | 2" | 20" / 12" / 2" | Fine tripod / dolly track elevation increments |
| Eighth (Pancake) | 20" ร 12" | 1" | โ | Micro-leveling under track sleepers & talent marks |
2. Diagram: Nested Modular Geometry & Opposed-Wedge Track Leveling
3. Structural Wood & Cribbing Best Practices
- ASTM D143 Baltic Birch Integrity: Void-free 9-ply 1/2" Grade B/BB face plys + solid center brace give Norms Apple Boxes 8,850 psi parallel compression and 1,350 psi shear strength.
- Never Stand on an Unstable Open Side: Always orient Apple Boxes flat ("1st position") or with structural grain carrying vertical loadโstand on end ("3rd position / New York") only on firm level concrete with sandbag stabilization if tall pedestals are built.
- Track Cribbing & 9.46ยฐ Wedges: Under steel or aluminum dolly sleepers, stack wide cribbing cribs bottom-up and top off each joint with opposed head-to-toe wedge pairs ($\tan\theta \approx 0.167 \le \mu_s$) tapped snug until a 4-foot precision level reads dead flat across both rails.
Hardware Engineered for This Rigging Standard
Frequently Asked Set Questions
Q: What are the exact standard dimensions of Full, Half, Quarter, and Eighth (Pancake) Apple Boxes?
A Full Apple Box measures 20 x 12 x 8 inches; a Half is 20 x 12 x 4 inches; a Quarter is 20 x 12 x 2 inches; and an Eighth (Pancake) is 20 x 12 x 1 inchโcombining modularly to build exact 1-inch to 20-inch steps.
Q: Why must track leveling wedges always be installed in opposing head-to-toe pairs?
Opposed wedges cancel horizontal ramp slope thrust so a 1,200 lb loaded camera dolly cannot slide downhill or rock side-to-side under rolling track deflection.
Q: Why does Norms specify 9-ply void-free Baltic Birch instead of hardware-store pine plywood?
True 1/2-inch 9-ply Grade B/BB Baltic Birch with internal center keel reinforcement yields over 8,850 psi compressive strength and supports 500+ lb concentrated dolly or actor step loads without delaminating.
VERIFIED IN HOLLYWOOD, CALIFORNIA, USA โข EST. 1962
Apple Boxes, Wedges & Dolly Track Cribbing Mechanics